Multi-functional Wood Lath Machine having capability of Turning , Carving , Shaping and Finishing(TCSF)
Almost all the operations like Wood Planning , Turning , Mortise, Slotting , Carving and Finishing can be done in single satup !
| Functions | Turning - Wood Lath Works |
| Max Wood Length | 3 Feet / 4 feet / Customize |
| Max Wood Width | 4x4 Inch / 6x6 inch / Customize |
| Wood Feeding System - Autofeed | Auto Feeding - Automatic Load and Unload (Fully Automatic) |
| Max Rapid Speed | 8000 mm/min |
| Position Accuracy | 0.05 mm (50 Micron) |
| Axis Motion Motor | Servo Motor |
| Spindle Specification | 3.5 kW / 4.5 kW / 6 kW |
| Wood Feeding System | Auto Feeding - Auto Center (Semi Automatic) |
| Power Consumption | 13KW ( 3 Phase ) |
Machine can accept 4 axis gcode to run all X, Y Z and A axis all together. This enable use to make carving operation on flat and circular surface. Some special type of pillar can do only with simultaneous 4 Axis capability.
Machine have Sensor for accurate measurement of both turning and carving tool lengths. Software store tool length and update the Y origin automatically. Without Auto tool zero you have to update origin on each wood size.
When you start the machine, machine set the X and Z Origin Automatically.
If this facility is not there then you must set the origin manually which can never be accurate.
Machine will stop Automatically if any Servo motor and spindle motor overload its rated capacity.
This feature will help you to avoided savior mechanical damage because of collision.
Automatic lubrication systems consist of a central reservoir supplying lubricant through distribution lines to directly slider blocks.
Automatic function change customization enhances manufacturing flexibility by allowing machinery to automatically switch between different functions (Turning /Carving / Shaping / Sanding). This will enable user to use multiple operation without any interruption.
Yellow Light indicates Main Power Supply is Applied.
Green Light Indicates Machine Power is On.
Red Light indicates Machine is at Emergency Stop mode.
Machine have fixture(Stand) to load the wood.
Once you set the fixture, you do not need to center mark on each similar wood. Loading and unloading manually, but machine take center automatically.
Machine can be operated remotely using any remote software like Anydesk / Ultraviewer. This is very nice feature that helps for training and trouble shooting.
User Friendly Interface : All axis positions, sensors and speed parameter accesible in one screen
Realtime Simulation : graphical illustration of toolpath
Realtime Speed Changing : You can change moving speed and RPM anytime during the production
Timelaps and counter : Realtime showing production and and production quantity.
Data management : you will get 60 GB Free space for your design management
Online Health Check up : we can troubleshoot the problem online, this can give immediate service and no need on-site engineer
| Functions | Turning - Wood Lath Works |
| Max Wood Length | 3 Feet / 4 feet / Customize |
| Max Wood Width | 4x4 Inch / 6x6 inch / Customize |
| Wood Feeding System - Autofeed | Auto Feeding - Automatic Load and Unload (Fully Automatic) |
| Max Rapid Speed | 8000 mm/min |
| Position Accuracy | 0.05 mm (50 Micron) |
| Axis Motion Motor | Servo Motor |
| Spindle Specification | 3.5 kW / 4.5 kW / 6 kW |
| Wood Feeding System | Auto Feeding - Auto Center (Semi Automatic) |
| Power Consumption | 13KW ( 3 Phase ) |
Machine can accept 4 axis gcode to run all X, Y Z and A axis all together. This enable use to make carving operation on flat and circular surface. Some special type of pillar can do only with simultaneous 4 Axis capability.
Machine have Sensor for accurate measurement of both turning and carving tool lengths. Software store tool length and update the Y origin automatically. Without Auto tool zero you have to update origin on each wood size.
When you start the machine, machine set the X and Z Origin Automatically.
If this facility is not there then you must set the origin manually which can never be accurate.
Machine will stop Automatically if any Servo motor and spindle motor overload its rated capacity.
This feature will help you to avoided savior mechanical damage because of collision.
Automatic lubrication systems consist of a central reservoir supplying lubricant through distribution lines to directly slider blocks.
Automatic function change customization enhances manufacturing flexibility by allowing machinery to automatically switch between different functions (Turning /Carving / Shaping / Sanding). This will enable user to use multiple operation without any interruption.
Yellow Light indicates Main Power Supply is Applied.
Green Light Indicates Machine Power is On.
Red Light indicates Machine is at Emergency Stop mode.
Machine have fixture(Stand) to load the wood.
Once you set the fixture, you do not need to center mark on each similar wood. Loading and unloading manually, but machine take center automatically.
Machine can be operated remotely using any remote software like Anydesk / Ultraviewer. This is very nice feature that helps for training and trouble shooting.
User Friendly Interface : All axis positions, sensors and speed parameter accesible in one screen
Realtime Simulation : graphical illustration of toolpath
Realtime Speed Changing : You can change moving speed and RPM anytime during the production
Timelaps and counter : Realtime showing production and and production quantity.
Data management : you will get 60 GB Free space for your design management
Online Health Check up : we can troubleshoot the problem online, this can give immediate service and no need on-site engineer
