CNC 5 Axis Router Double Station

Samples

Specification
Features
  • ATC - Auto Tool Change

    Automatic tool change (ATC) in CNC machines automates tool swapping, housed in a tool magazine and selected by the CNC program. During machining, the machine pauses to change tools, retrieving and inserting them using a robotic arm. Optional tool measurement ensures precision, and clamping secures the new tool before resuming operations, streamlining manufacturing and enhancing productivity.

  • Auto Lubrication

    Automatic lubrication systems consist of a central reservoir supplying lubricant through distribution lines to directly slider blocks.

  • Auto Origin

    When you start the machine, machine set the X and Z Origin Automatically.
    If this facility is not there then you must set the origin manually which can never be accurate.

  • Auto Tool zero

    Machine have Sensor for accurate measurement of both turning and carving tool lengths. Software store tool length and update the Y origin automatically. Without Auto tool zero you have to update origin on each wood size.

  • Dome Light Indication

    Yellow Light indicates Main Power Supply is Applied.
    Green Light Indicates Machine Power is On.
    Red Light indicates Machine is at Emergency Stop mode.

  • Simultaneous 5 Axis

    Machine can accept 5 axis gcode to run all X, Y, Z,A and B axis all together. This enable use to make carving operation on flat and circular surface. Some special type of pillar can do only with simultaneous 5 Axis capability.

Specification

Features

  • ATC - Auto Tool Change

    Automatic tool change (ATC) in CNC machines automates tool swapping, housed in a tool magazine and selected by the CNC program. During machining, the machine pauses to change tools, retrieving and inserting them using a robotic arm. Optional tool measurement ensures precision, and clamping secures the new tool before resuming operations, streamlining manufacturing and enhancing productivity.

  • Auto Lubrication

    Automatic lubrication systems consist of a central reservoir supplying lubricant through distribution lines to directly slider blocks.

  • Auto Origin

    When you start the machine, machine set the X and Z Origin Automatically.
    If this facility is not there then you must set the origin manually which can never be accurate.

  • Auto Tool zero

    Machine have Sensor for accurate measurement of both turning and carving tool lengths. Software store tool length and update the Y origin automatically. Without Auto tool zero you have to update origin on each wood size.

  • Dome Light Indication

    Yellow Light indicates Main Power Supply is Applied.
    Green Light Indicates Machine Power is On.
    Red Light indicates Machine is at Emergency Stop mode.

  • Simultaneous 5 Axis

    Machine can accept 5 axis gcode to run all X, Y, Z,A and B axis all together. This enable use to make carving operation on flat and circular surface. Some special type of pillar can do only with simultaneous 5 Axis capability.

Videos

Recommend:

Inquire Now!


Copyright © 2025 All Rights Reserved
Developed by
The Dhwalin