(Model : 2X-T-AC)
Wood Lath Machine having capability of Turning
Operations like Wood Turning can be done in single setup !
| Max Rapid Speed | 8000 mm/min |
| Max Wood Width | 4x4 Inch / 6x6 inch / Customize |
| Power Consumption | 13KW ( 3 Phase ) |
| Max Wood Length | 3 Feet / 4 feet / Customize |
| Position Accuracy | 0.05 mm (50 Micron) |
Machine have fixture(Stand) to load the wood.
Once you set the fixture, you do not need to center mark on each similar wood. Loading and unloading manually, but machine take center automatically.
When you start the machine, machine set the X and Z Origin Automatically.
If this facility is not there then you must set the origin manually which can never be accurate.
Machine have Sensor for accurate measurement of both turning and carving tool lengths. Software store tool length and update the Y origin automatically. Without Auto tool zero you have to update origin on each wood size.
Yellow Light indicates Main Power Supply is Applied.
Green Light Indicates Machine Power is On.
Red Light indicates Machine is at Emergency Stop mode.
User Friendly Interface : All axis positions, sensors and speed parameter accesible in one screen
Realtime Simulation : graphical illustration of toolpath
Realtime Speed Changing : You can change moving speed and RPM anytime during the production
Timelaps and counter : Realtime showing production and and production quantity.
Data management : you will get 60 GB Free space for your design management
Online Health Check up : we can troubleshoot the problem online, this can give immediate service and no need on-site engineer
Manual tool change refers to the process of physically replacing the cutting tool in a CNC (Computer Numerical Control) machine by the operator
Machine can be operated remotely using any remote software like Anydesk / Ultraviewer. This is very nice feature that helps for training and trouble shooting.
| Max Rapid Speed | 8000 mm/min |
| Max Wood Width | 4x4 Inch / 6x6 inch / Customize |
| Power Consumption | 13KW ( 3 Phase ) |
| Max Wood Length | 3 Feet / 4 feet / Customize |
| Position Accuracy | 0.05 mm (50 Micron) |
Machine have fixture(Stand) to load the wood.
Once you set the fixture, you do not need to center mark on each similar wood. Loading and unloading manually, but machine take center automatically.
When you start the machine, machine set the X and Z Origin Automatically.
If this facility is not there then you must set the origin manually which can never be accurate.
Machine have Sensor for accurate measurement of both turning and carving tool lengths. Software store tool length and update the Y origin automatically. Without Auto tool zero you have to update origin on each wood size.
Yellow Light indicates Main Power Supply is Applied.
Green Light Indicates Machine Power is On.
Red Light indicates Machine is at Emergency Stop mode.
User Friendly Interface : All axis positions, sensors and speed parameter accesible in one screen
Realtime Simulation : graphical illustration of toolpath
Realtime Speed Changing : You can change moving speed and RPM anytime during the production
Timelaps and counter : Realtime showing production and and production quantity.
Data management : you will get 60 GB Free space for your design management
Online Health Check up : we can troubleshoot the problem online, this can give immediate service and no need on-site engineer
Manual tool change refers to the process of physically replacing the cutting tool in a CNC (Computer Numerical Control) machine by the operator
Machine can be operated remotely using any remote software like Anydesk / Ultraviewer. This is very nice feature that helps for training and trouble shooting.
