Call Us: +91 6353531460 | Email :

Magnetic removable 3d printer bed surface 200×200 Size

2,200 1,500

Name:  Square Heatbed Magnetic Sticker  

Size: 200*200mm

Reviews (0)


Name:  Square Heatbed Magnetic Sticker  

Size: 200*200mm



1.The product is divided into two sides of the A.B board.

2.Separate bending to take the model. It is more convenient.

3.No need for beautiful paper and scrapers to assist the model.

4.Can be installed on hot bed and glass platform.

5.Printing does not warp. No glue is needed.

6.Can be printed on a cold bed.

7.The A plate is flexible and magnetic, easy to move away from the build platform, take away the print model

8.Ours is PC material, short-term temperature resistance of 180 degrees, long-term 130 degrees. More than 130 degrees of magnetic properties will be weakened but will not lose magnetism, so can be applied to PLA/ABS and other filament.

9.PC material is flame retardant and wear resistant. Oxidation resistance, low mold shrinkage, good dimensional stability

10.A B board is flat,It can better reduce printing errors and make the printed model more standard


Product advantages:

The temperature of the magnetic sticker on the market cannot exceed 80 degrees. If it exceeds 80 degrees, it will lose its magnetic properties, but our products can reach 130 degrees without losing magnetism. Can be applied to a variety of consumables such as PLA / ABS printing.

PLA: hot bed temperature 50~80 degree.

​ABS: the temperature of the hot bed is 100 degrees.



Due to the magnetic pole factor, the magnetic poles are directional  when the two stickers are attracted.If the suction is unstable, please rotate side A by 90 degrees.

Please remove the module after printing, if the cooling is too long, the module and the platform will adsorb larger


Installation method:

tear open the B-side adhesive, directly attach it to the platform, Be careful to flatten it, and adsorb the A-side printing layer on the B surface without bubbles.


There are no reviews yet.

Be the first to review “Magnetic removable 3d printer bed surface 200×200 Size”